-
Sufficiency Evalution of Pune Metro Rail Networks
Akshay Rajendra Salunke ; Suraj Bharat Alhat; Mayur Arun Dalvi; Suraj Shankar Dubal; Ghansham Sarode
Civil Engineering
Year: 2016, Volume:2, Issue : 12
Pages: 410 - 413
As India is one of the fastest developing country in world the metro rail network plays an important role in cities transport system so it is now need of future to have an efficient and well effective metro rail network in city. The objective of this research is a preliminary examination of metro rail network extensiveness versus the city’s needs, aiming to assist the estimation of the adequacy of a metro network. This study is concentrated on comparing mature metro system in several large European cities with Indian cities based on a selection of indicators relating metro network characteristics i.e. Length and no. of stations, city characteristics eg. Population and density. A methodology exploiting these macroscopic characteristics in a strategic planning context was developed and a combination of related indicators is proposed. This methodology is applied for the estimation of the degree of adequacy of the current Athens, Greece metro network in a relation to city’s needs. Findings indicate that the Athens metro network cannot be yet characterized as adequate and specific proposals are made in terms of future network extensions. These proposals served as the initial reference point in a more sophisticated planning process for metro system future development.
Read More...
-
Oruta : Privacy-Preserving Public Auditing for Shared Data in the Cloud
Puja Dalvi ; Rohit Kelgandre; Varsha Chore ; Pooja Das; Prof. Rakesh Badodekar
Information Technology
Year: 2016, Volume:2, Issue : 12
Pages: 414 - 417
With cloud analysis, it is typical for data to be put away in the cloud, as well as shared over multiple clients. Unfortunately, the integrity of cloud data is liable to suspicion because of the presence of programming disappointments and human blunders. In this paper, we propose a novel privacy-preserving component that discovers open auditing of shared data put away in the cloud. Specifically, we attempt ring marks to process check metadata expected to review the accuracy of data shared with multiple users. With our component, the endorser's character on every piece in shared data is kept private from third party verifiers, who have the capacity to proficiently confirm the shared data integrity without retrieving the whole document. Our trial results show the adequacy and proficiency of our component when auditing shared data integrity.
Read More...
-
A Study on Work Stress Among Bank Employees in State Bank of India with Reference to Tiruchirapalli
Vinothini ; B. Kishori
MBA
Year: 2016, Volume:2, Issue : 12
Pages: 418 - 421
Stress refers to the strain appear the conflict between our external environment and us, leading to emotional and physical pressure. Everyone in their working atmosphere is exposed to tension and anxiety as they get through the duties assigned to them. This paper seeks to determine the impact of various constituents of occupational work stress on the employees of banking sector. The present study is confined only to State Bank of India, main branch, Tiruchirappalli. A sample of 250 employees was considered. Random convenient sampling was used. It was found from the results because of long time working hours, role of conflict and political pressure there is high degree of occupational work stress amongst the private and public sector bank employees.
Read More...
-
Treatment of Seawater using Solar Energy in A Re-Circulation Pipe Reactor
L. Nageswara Rao ; Manahel Al Araimi; B. M. Sangeetha; Feroz Shaik
Chemical Engineering
Year: 2016, Volume:2, Issue : 12
Pages: 422 - 426
Experimental investigations were carried out in a recirculation pipe reactor exposed to solar energy, to study the degradation of the pollutants present in the seawater. Titanium dioxide (TiO2) was used as photocatalyst and the effect of degradation of pollutants was evaluated through percentage reduction of Chemical Oxygen Demand (COD), Total Organic Carbon, Total Inorganic Carbon (TIC), pH, Total Dissolved Solids (TDS) and Turbidity.
Read More...
-
Frequency Deviation Mitigate for Renewable Energy Power System in Matlab Simulation
Rahul R Gunjker ; Bhupendra V Deshmukh; Rakesh Kumar Jha
Electrical Engineering
Year: 2016, Volume:2, Issue : 12
Pages: 427 - 435
In this research paper frequency deviation mitigate analysis on Renewable Energy Power System in MATLAB Simulation for autonomous system which is connected to variable electrical load power. The results of Renewable Energy Power System are analyzed in frequency-domain and also analyzed the changes between total generated Power and electrical load power. In proposed system included five Wind Turbine Generators (WTGS), Fuel Generator (FG) and Energy Storage System (ESS). The nature of output power of wind turbine generator is mostly non-linear and this deviation effect on the frequency of the all system and also depends on the sudden change in electrical load power and total generation power or both, to solve this problem considering renewable energy power system with PID controller with proper control gain. By using PID controller the frequency deviation of the system is alleviated. A simulation approach based on mathematical modelling of Wind Turbine Generator (WTGS), Fuel Generator (FG) and Energy Storage System (ESS) the system observed in various cases in many operating points and different-different conditions, such as variable (non-linear) wind speed and load disturbances. It can be concluded from all MATLAB simulation results that the power deviation of the system is alleviated.
Read More...
-
Mechanical Behaviour of Particle Reinforced aluminium Matrix Composites - A Review
Amresh Kumar ; Dr. Manoj Kumar; Rachin Goyal
Mechanical Engineering
Year: 2016, Volume:2, Issue : 12
Pages: 436 - 439
Metal Matrix Composites (MMCs) with improved mechanical properties and their relatively reduced cost have made them attractive for wide range of applications like aerospace, automotive, sports and electronics industries. The advantages of particulate-reinforced composites over others are their formability with cost advantage. Further, they are inherent with heat and wear resistant properties. In general, the Al-MMCs are found to have higher elastic modulus, tensile and fatigue strength over monolithic alloys. It is evident that the structures and properties of the reinforcements control the mechanical properties of the composites. However, it is difficult to establish a direct relationship between mechanical properties of the composites, volume fraction, type of reinforcement and surface nature of reinforcements.
Read More...
-
A Survey on Audio Segmentation and Classification Methods
Manasi Choche ; Dr. Satishkumar Varma
Computer Engineering
Year: 2016, Volume:2, Issue : 12
Pages: 440 - 443
An audio is a sound within audible range available to human. This range is study of all mechanical waves in gases, liquids and solids including vibration, and sound. Audio segmentation is most important preprocessing step in several audio processing applications with a significant impact e.g. on speech recognition system. This paper introduces a framework which analyzes the advantages of different segmentation and classification methods. The different audio segmentation methods like Bayesian Information Criterion (BIC), two phase audio segmentation method, metric-based method are studied. Audio segmentation plays important role in audio classification. After segmenting audio it is classified into different classes. The classification model consists of rule-based and model based.
Read More...
-
Investigation and Performance Analysis of DC-DC Converter For High Efficiency Led Driver
Mr. Prashant A. Meshram ; Ms. Priya P. Gaikwad; Ms. Ankita Pande; Mr. Shivpal R. Verma; Ms. Palak Sharma
Electrical Engineering
Year: 2016, Volume:2, Issue : 12
Pages: 444 - 452
The need to conserve energy has led to development of low power consuming devices. Out of many one such device is LED used for lightning purposes. The LED requires a specific amount of voltage and current depending upon the type, rating and amount of luminous intensity. This supply to LED is fed through the LED driver circuit comprising of DC to DC converter. The objective is to perform the comparative study on various types of DC to DC converters for LED driver unit and doing simulations and implementing practically. The target is to determine the converter circuit that suits best for necessary equipment. Here the desired equipment is a LED which are used in commercial as well as house hold lightning purposes. There are many kinds of ratings available out of which target power is 21W and according suitable supply voltage of 230V.With an array of LEDs, the main challenge is to ensure every LED in the array is driven with the same current. Placing all the LEDs in a series string ensures that exactly the same current flows through each device. MATLAB Simulation is used for the initial validation of the proposed scheme and for the selection of circuit parameters. Actual controller is implemented using AVR atmega32 microcontroller.
Read More...
-
Symmetrically and Non Symmetrically Pattern of Shear Walls
Renu Mishra ; Prof A. K. Dwivedi
Civil Engineering
Year: 2016, Volume:2, Issue : 12
Pages: 453 - 455
Shear wall is one of the most commonly used lateral load resisting in high rise building. Shear wall has high in plane stiffness and strength which can be used to simultaneously resist large horizontal load and support gravity load. The objective of the present study is to study the behavior of building frame under symmetrically and asymmetrically placed shear walls. To generalize the conclusions frame Symmetrical plan has been used. To achieve the objective, building frame has been analyzed without shear wall as well as shear wall placed symmetrically and asymmetrically.
Read More...
-
Automotive Financing System - A Survey
Vidya M N
Computer Science and Engineering
Year: 2016, Volume:2, Issue : 12
Pages: 456 - 458
Automotive Financing System offers transactional services to the automotive clients under financial sectors. Regardless of the size of the system the automated electronic application can help to get connected to the customers and suppliers quickly and easily. It offers a variety of electronic invoicing solutions which meet the local regulations in all the countries around the world. AFS can provide tracking of inventory and tracking of all transactions associated with the vehicles and can provide Bank line of credit to the dealers. The whole hierarchy of the system is geographically spread across many regions; it needs a single user interface to manage all branches across the globe which can be achieved with AFS.
Read More...
Abstract
